8片150W背面安装效果图

8片板正面安装效果图。

SPECIFICATION FOR STREET LIGHT POLES

Supply of GI Octagonal pole of 10Mtr. height ,Top – 120 mm dia, Bottom – 300 m dia and 3mm

thickness sheet. Base plate of minimum dimension 200mm X 200mm X 12 mm, , foundation bolts (4

nos with 3 nos of nuts and washers in each), single arm bracket for mounting the light fittings,

bakelite sheet with one 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door

opening for cable connection, Common templates minimum 1 for each 15 poles.

Detail specifications of Galvanized Octagonal poles.

Design

The Octagonal Poles shall be designed to withstand the maximum wind

speed as per IS 875. The top loading i.e. area and the weight of fixtures are

to be considered to calculate maximum deflection of the pole and the same

shall meet the requirement of BS: 5649 Part VI 1982.

Pole Shaft

The pole shaft shall be made from sheet steel confirming to BSEN 10025.

The pole shaft shall have octagonal

cross

section

and

shall

be

continuously tapered with single longitudinal welding. There shall not be

any circumferential welding. The welding of pole shaft shall be done by

Submerged Arc Welding (SAW) process.

All octagonal pole shafts shall be provided with the rigid flange plate of

suitable thickness (as per IS 2062) with provision for fixing 4 foundation

bolts. This base plate shall be fillet welded to the pole shaft at two

locations i.e. from inside and outside.

Door opening

The octagonal Poles shall have door of approximate 500 mm length at the

elevation of 500 mm from the Base plate. The door shall be vandal

resistance and shall be weather proof to ensure safety of

inside

connections. The door shall be flush with the exterior surface and shall

have

suitable

locking

arrangement.

There

shall

also

be

suitable

arrangement for the purpose of earthing. The pole shall be adequately

strengthened at the location of the door to compensate for the loss in

section.

Material

Octagonal Poles

Base Plate

Foundation Bolts

HT Steel Conforming to grade

S355JO. Fe 410 conforming to IS

226 / IS 2062 EN.8 grade

Pole sections

The Octagonal Poles shall be in single section. There shall not

be any circumferential weld joint.

Galvanization

The poles shall be hot dip galvanized as per relevant Indian

standards with average coating thickness of minimum 70

micron. The galvanizing shall be done in single dipping.

Fixing Type

The Octagonal Poles shall be suitable for bolting on a foundation

with a set of four foundation bolts for greater rigidity.

Bracket for fixing luminaire

The brackets shall be made of specified size NB G.I heavy duty

pipe with minimum 1000 mm long, bent at an angle of 120

degree, with necessary holding brackets, hold fasts etc.

Approved makes : Subham poles (Bangalore) / Bajaj / Kumaran Poles /

Crompton Greaves)

Note:- 1) Pole drawing along with details of baseplate , foundation bolts and

foundation details (RCC) shall be submitted along with offer.

Technical specification of Cameras

Thermal CCTV 500 Meter Range Night Vision, Anti Fog CCTV

Long-Range PTZ Camera Overview

Night-vision IP camera systems provide surveillance in total darkness. These network attached

PTZ camera systems include built-in IR illumination. There are a number of off-the-shelf models

available and custom-designed very long-range camera systems that are designed to your

requirements.

Some of the off-the-shelf PTZ cameras are configurable. They provide a choice of 940nm, 850nm

IR or white light illumination. All these PTZ cameras include smooth and accurate 360° of

rotation with remarkable speeds.

Do you need to see very far away? If you need a system that can see up to 5 k.m. away, take a

look at the very long-range optical PTZ systems with IR illumination, or the thermal imaging PTZ

systems that operate without any lighting.

These standard night vision PTZ network-attached cameras feature up to 37 X optical zoom lens

with 850nm IR illuminator. They are excellent for covert nighttime security applications. The

Distance Comparison Chart compares how far you can see. It provides the detection, recognition

and identification distances of each PTZ camera.

Night vision Camera Features

 Network Attached IP camera system

 Advanced IR automatically adjusts based on camera zoom lens movement

 Illuminate distances over 450 feet away

 LED Technology: 850 Nanometers

 NEMA 4x and IP66 Rating to prevent the ingress of water and minute particles

 30 images/second @ full resolution (5 Megapixel )

 Proven network reliability

Make: Any available brand with same feature.

Solar panel system-specification

Particulars Description

Solar Power Plant 1 KWp

Solar Panel in Watt 335 kWp

Solar Panel Qty 3 nos.

Solar Structure 1 KW

On Grid Solar Inverter 1 KW

MC4 Connector 2 Pair

Junction Box 1 Nos

DC Cable 30 Mtr

AC Cable 20 Mtr

Space required 100 sq feet

Solar Accessories

Fasteners, Cable Tie , Crimping

Tool, Earthing Kit, Lighting

Arresstor

Brand: Any with same specification

Civil work specification

1. Concreter

M20-Grade of concrete using 43 grade PPC cement for RCC foundation

M-10 Grade of concrete using 43 grade of PPC cement for PCC work

2. Reinforcement (Steel rebar)

Fe-550 grade of steel reinforcement is using .

Brand of steel: TATA, JSW,SAIL

CEMENT : ANY OF 43 GRADE